| Customization: | Available |
|---|---|
| After-sales Service: | on-Site Installation & Commissioning |
| Warranty: | 1 Year for Whole Machine |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Machine Composition | |
| Unit | Qty |
| Double-station unwind | 1 set |
| Comma bar coater | 1 set |
| Drying unit | 2m/section, 2m*8=16m in total |
| Heat/Cooling unit | 1 set |
| Single-station unwinder | 1 set |
| Double-station rewind | 1 set |
| Electrical control system | 1 set |
| Main Technical Parameters | |
| Machine speed | 0~20m/min, designable |
| Coating speed | 1~20m/min, actual coating speed depends on properties and thickness uniformity of substrate used, properties of solvent, amount of coating on the coating plate, coating property, etc. |
| Substrate width | Max. 550mm |
| Substrate | PET, PI, NON-WOVEN fabric |
| Coating type | Comma bar coating |
| Oven length | 4m/section, designable |
| Heating type | Electricity, natural gas, thermal oil, steam, etc. |
| Required compressed air | Filtration and cleaning (remove oil & moisture) treatment. Min. pressure 6kg/cm2. |
| Tension control range | 3~30KG (whole web load) |
| Tension controlled precision | ±0.2KG (whole web precision) |
| Substrate roll inner diameter | Unwind 3", rewind 3", designable |
| Guide roller effective width | mm |
| Unwind diameter | Max.φ400mm |
| Rewind diameter | Max.φ800mm (double-station rewinding) |
| Motor voltage | 380VAC, 3P ±7%, 50HZ±2% |
| Control voltage | 220VAC, 1P ±7%, 50HZ±2% |
| Machine color | RAL color system |
| Total weight: | Subject to final design |
){kind=link}