Advanced Reflective Film Coating Machine for Optimal Performance
Note: the production line consists of bead planting machine & laminating machine
Application: suitable for coating to produce Reflective Materials/Films.
Features:
1. Siemens PLC control system for the whole machine, HMI equipped at each key unit like unwinder, rewinder, coating unit. High degree of automation, easy operation, less manpower.
2. Safety protection devices, emergency stop system and fault alarm function, safer coating production.
3. Independent and precise temperature control for oven partitioned area. 100mm insulation layer inside of oven is more energy-saving.
4. Segmented and closed loop tension control for the whole machine ensures more stable tension, with servo correction/web guide, the rewinding effect is more perfect/orderly.
5. Technical engineering team supports on-site and remote service, from on-site installation & commissioning to common trouble-shooting, rest assured for after-sale service.
Coating Machine is Non-standard type, customizable for customers!
Part One: Bead Planting Machine
| Bead Planting Machine |
|
| Application |
Suitable for glass beading planting, etc. |
| Machine Composition |
| Unit |
Qty |
| Double-station unwind |
1 set |
| Pulling unit |
2 sets |
| Coating head |
1 set, for bead planting |
| Drying unit |
3m/section, 6sections. 18m in total |
| Cooling & pulling unit |
1 set |
| Electrical control system |
1 set |
| Single-stationrewind |
1 set |
| Heating system |
1 set |
| Main Technical Parameters |
| Mechanical speed |
Max.30m/min |
| Coating speed |
5~25m/min, depends on coating thickness, etc. |
| Substrate width |
Max. 1650mm |
| Unwind diameter |
Max. 600mm |
| Rewind diameter |
Max. 600mm |
| Heat type |
Thermal oil/natural gas/electricity/steam, etc. |
Part Two: Laminating Machine
| Laminating Machine |
|
| Application |
Suitable for some film/paper lamination production |
| Machine Composition |
| Unit |
Qty |
| Double-station unwind |
2 sets |
| Pulling unit |
1 set |
| Drying unit |
3m/section, 14sections. 42m in total |
| Cooling & pulling unit |
1 set |
| Heat lamination pulling unit |
1 set |
| Electrical control system |
1 set |
| Single-station rewinding unit |
2 sets |
| Heating system |
1 set |
| Main Technical Parameters |
| Mechanical speed |
Max.30m/min |
| Coating speed |
5~25m/min (depends on coating thickness, etc.) |
| Substrate width |
Max. 1600mm |
| Unwind diameter |
Max. 600mm |
| Rewind diameter |
Max. 600mm |
| Heat type |
Thermal oil/natural gas/electricity/steam, etc. |
Audited Supplier 
){kind=link}