Stretch Film Casting Machine 20t/Day PE Plastic Extrusion Cast Film Machine

• Customization: Available
• After-sales Service: on-Site & Remote Support
• Warranty: 1 Year
• Model NO.: FR 65/65/65/100
• Type: Film Extruder
• Plastic Processed: PE
• Product Type: Stretch Film
• Feeding Mode: One Feed
• Assembly Structure: Integral Type Extruder
• Screw: Multi-Screw
• Engagement System: Screw Extrusion
• Screw Channel Structure: Deep Screw
• Exhaust: Exhaust
• Automation: Automatic
• Computerized: Computerized
• Speed: 350m/Min
• Rewind Shaft: 4-Shaft Auto Exchange
• Capacity: 20tons/24hours
• Raw Material: LLDPE / Mldpe
• Product Thickness: 12~35um
• Film Thickness: Auto Detecting & Auto Adjusting
• Finished Product Width: 2000mm (500mm*4 Rolls, 250mm*8 Rolls)
• Film Structure: D/A/C/B/D a/D/C/D/B
• Transport Package: Pallet
• Specification: 60T
• Trademark: FURIMACH
• Origin: Wuhu, China

Product Description

Stretch Film Casting Machine 20T/Day
Application: PE stretch film extrusion production in high speed.
Features: Siemens PLC & Siemens servo motor control. Auto die head and online thickness monitoring & adjusting. Max. 60KG per Roll. Waste recycling system for saving more cost!

1. Technical parameters:

Product	PE Stretch film
Finished product width	2000mm (500mm*4 rolls, 250mm*8 rolls)
Finished product thickness	0.012-0.035mm
Raw materials used	LLDPE, MLLDPE and other raw materials
Film structure	D/A/C/B/D          A/D/C/D/B
Extrusion volume (MAX)	920kg/h
Mechanical line speed (MAX)	400m/min
Acceptance criteria	Producing product thickness of 0.02mm, production line speed 380m/min, daily output of approximately 20 tons
Energy consumption per ton of products	Producing 0.02mm thick stretch film with electricity consumption of around 400 kWh per ton.
Product elongation rate	Producing 0.02mm thick stretch film, running speed 380m/min, stretching to around 4.3 meters per meter.

2. Free gift of vulnerable parts
1. Machine part
(1). One set each of die head operation tool box and mechanical operation tool box
(2). Die head adjustment bolts come standard with die head manufacturers
(3). Filter: 200 mesh 2m
(4). High temperature bite agent      1 Bucket (mainly used for die distributor screws, it is convenient to remove the screws after use)
(5). Special blade for slitting 1 box
2. Electrical parts
(1). Solid state relays                                                  for each specification 2 pieces
(2). Die head heating rod                                            standard configuration of die head manufacturer
(3). Thermocouples                     per specification    2 pieces (delivered in different lengths according to actual needs)
(4). Each specification of heating coil 2 parts (including connectors)
(5). Wrench switch                                                                      2 pieces
(6). Photoelectric switch                                                             2 pieces
(7). Pressure sensor                                                                     2 pieces
(8). Green rough noodles   O Ring                                                2 pieces
(9). Green rough surface ring                                                      2 pieces
(10). Air expansion shaft                                                            1 piece

3. Customer needs to prepare:
1. On-site installation foundation works
2. Piping works and materials other than machines
3. Raw materials used for test run
4. On-site debugging personnel daily salary, visa, air tickets, transportation, accommodation and meal expenses.
5. Air compressor
6. On-site piping and construction of chillers and cooling water lines.
7. On-site installation tools (forklift, crane, etc.)